Code of Maine Rules
02 - DEPARTMENT OF PROFESSIONAL AND FINANCIAL REGULATION
041 - OFFICE OF PROFESSIONAL AND OCCUPATIONAL REGULATION (OPOR)
BARBERING AND COSMETOLOGY LICENSING PROGRAM
Chapter 26 - ESTABLISHMENT, INDEPENDENT BOOTH AND SCHOOL OPERATION, SANITATION AND INFECTION CONTROL STANDARDS, AND SAFE PRACTICE PROCEDURES
Section 041-26-26.260 - Health and Safety Standards - Electric Files and Drill Bits
Universal Citation: 02 ME Code Rules ยง 041-26-26.260
Current through 2024-38, September 18, 2024
26.261 After each use and before using on another client, diamond, carbide, natural and metal bits shall be cleaned and disinfected by:
1. Using an ultrasonic
cleaner; or
2. Completely immersing
each bit in acetone for ten (10) minutes; or
3. Cleaning buffing bits with soap or
detergent and water.
26.262 Arbor or sanding bands or sleeves are single-use items and shall be discarded immediately after use.
Disclaimer: These regulations may not be the most recent version. Maine may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
