Louisiana Administrative Code
Title 55 - PUBLIC SAFETY
Part III - Motor Vehicles
Chapter 11 - Vehicle Safety Equipment
Subchapter A - Motorcycle Helmets
Section III-1113 - Reference Marking
Current through Register Vol. 50, No. 9, September 20, 2024
A. Only a reference headform that is firmly seated with the basic and reference planes horizontal may be used. The completed helmet to be tested shall be placed on the appropriate reference headform, as specified in §1112. A and §1113 B
B. A 10 pound (4.5 kg) static vertical load shall be applied through the helmet's apex. The helmet shall be centered laterally and seated firmly on the reference headform according to its helmet positioning index.
C. While maintaining the load and position described in §1113 C, a line shall be drawn (hereinafter referred to as test line) on the outer surface of the helmet coinciding with portions of the intersection of that service with the following planes, as shown in §1131. C Figure 2:
AUTHORITY NOTE: Promulgated in accordance with R.S. 32:190.