Louisiana Administrative Code
Title 55 - PUBLIC SAFETY
Part III - Motor Vehicles
Chapter 11 - Vehicle Safety Equipment
Subchapter A - Motorcycle Helmets
Section III-1107 - Configuration

Universal Citation: LA Admin Code III-1107

Current through Register Vol. 50, No. 9, September 20, 2024

A. Each helmet shall have a protective surface of continuous contour at all points on or above the test line described in §1113. C The helmet shall provide peripheral vision clearance of at least 105° to each side of the mid-sagittal plane, when the helmet is adjusted as specified in §1114 The vertex of these angles, shown in §1131. D Figure 3, shall be at the point on the anterior surface of the reference headform at the intersection of the mid-sagittal and basic planes. The brow opening of the helmet shall be at least 1 inch (2.5 cm) above all points in the basic plane that are within the angles of peripheral vision (see §1131. D Figure 3).

AUTHORITY NOTE: Promulgated in accordance with R.S. 32:190.

Disclaimer: These regulations may not be the most recent version. Louisiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.