Louisiana Administrative Code
Title 51 - PUBLIC HEALTH-SANITARY CODE
Part XXIV - Swimming Pools and Natural or Semi-Artificial Swimming or Bathing Places
Chapter 3 - Design Requirements for Swimming Pools [formerly Subpart B]
Section XXIV-303 - Dimensional Design [formerly paragraph 24:005]

Universal Citation: LA Admin Code XXIV-303

Current through Register Vol. 50, No. 9, September 20, 2024

A. There shall be construction tolerances allowed on all dimensional designs. Overall length, width, and depth in the deep end may vary plus or minus 3 inches. All other overall dimensions may vary plus or minus two inches), unless otherwise specified (such as in a Class A pool). The designed waterline shall have a maximum construction tolerance at the time of completion of the work of plus or minus 1/4 inch for pools with adjustable weir surface skimming systems, and of plus or minus 1/8 inch for pools with non-adjustable surface skimming systems.

B. The size of Class A or Class D pools shall be governed by the requirements of the activities for which the installation is intended.

AUTHORITY NOTE: Promulgated in accordance with the provisions of R.S. 40:4(A)(11) and R.S. 40:5(3)(16)(17)(20).

Disclaimer: These regulations may not be the most recent version. Louisiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.