Louisiana Administrative Code
Title 51 - PUBLIC HEALTH-SANITARY CODE
Part XIV - Plumbing
Chapter 4 - Plumbing Fixtures
Section XIV-407 - Materials and Performance Standards
Current through Register Vol. 50, No. 9, September 20, 2024
A. Plumbing fixtures shall be constructed from approved materials, have smooth impervious surfaces, be free from defects and concealed fouling surfaces. Except as permitted elsewhere in this code, plumbing fixtures and appurtenances shall conform to the standards listed in the following Table (LAC 51:XIV.Table 407).
|
Table 407 General Fixtures and Accessories |
|
|
Materials |
Standards |
|
Fixture Fittings |
ASME A112.18.1, CSA B125.1 |
|
Fixture Fittings, Backflow Protection Devices and Systems |
ASME A112.18.3 |
|
Fixture Waste Fittings |
ASME A112.18.2, CSA B125.2 |
|
Flexible Water Connectors (prohibited for use in instances when the supply temperature will exceed 150°F) |
ASME A112.18.6, CSA B125.6 |
|
Fixtures, Enameled Cast Iron and Steel Plumbing |
ASME A112.19.1, CSA B45.2 |
|
Fixtures, Non-Vitreous Ceramic (Fireclay) |
ASME A112.19.9M |
|
Fixtures, Ceramic Plumbing |
ASME A112.19.2, CSA B45.1 |
|
Fixtures, Hydraulic Performance for Water Closets and Urinals |
ASME Al12.19.6 |
|
Fixtures, Stainless Steel Plumbing |
ASME A112.19.3, CSA B45.4 |
|
Fixtures, Porcelain Enameled Formed Steel Plumbing |
ASME A112.19.4M |
|
Fixtures, Plumbing (for) Land Use, including Fixtures for Medical and Dental Facilities |
FS WW-P-541 E/GEN(1) |
|
Lead, Caulking |
FS QQ-L-156 |
|
Macerating Toilet Systems |
ASME A 112.3.4 |
|
Plastic Bathtub and Shower Units |
ANSI Z124.1.2 |
|
Plastic Lavatories |
ANSI Z124.3 |
|
Plastic Sinks |
IAPMO Z124.6 |
|
Plastic Water Closet Bowls and Tanks |
ANSI Z124.4 |
|
Trim for Water Closet Bowls, Tanks and Urinals |
ASME A112.19.5 |
|
Vitreous China Nonwater Urinals |
ASME A112.19.19 |
|
Water Hammer Arresters |
ASSE 1010 |
AUTHORITY NOTE: Promulgated in accordance with R.S. 40:4(A)(7) and R.S. 40:5(2)(3)(7)(9)(16)(17)(20).
