Current through Register Vol. 50, No. 9, September 20, 2024
A. CPE Requirement
1. All persons seeking to renew a gas fitter
license issued by the board are required to attend and show proof of attendance
at no less than 2 1/2 hours of a board-approved CPE class in the prior calendar
year, as set out in this Section.
2. All persons seeking to renew a master gas
fitter license or to convert an inactive master gas fitter license to an active
master gas fitter license must attend and show proof of attendance at no less
than four hours of a board-approved CPE class in the prior calendar year, as
set out in this Section.
3. A
holder of an inactive master gas fitter license who seeks to renew said license
must file an affidavit in a form provided by the board, that they have been
inactive as a gas fitter in the previous year, and that they will remain
inactive and not work as a gas fitter for the year for which they seek to renew
their license. Upon such filing with the board, the holder of an inactive
master gas fitter license will not be required to meet the CPE requirements set
out herein.
4. A holder of an
inactive master gas fitter license who seeks to function as a gas fitter is
required to attend and show proof of attendance at no less than 2 1/2 hours of
a board-approved CPE class in the prior calendar year, as set out in this
Section.
5. All persons holding and
seeking to renew both gas fitter and journeyman plumber licenses issued by the
board are required to attend and show proof of attendance at no less than 4 1/2
hours as set out in this Section and in §1001
6. All persons holding and seeking to renew
both gas fitter and master plumber licenses issued by the board are required to
attend and show proof of attendance at no less than six hours as set out in
this Section and in §1001
7. All
persons holding and seeking to renew both master gas fitter and journeyman
plumber licenses issued by the board are required to attend and show proof of
attendance at no less than six hours as set out in this Section and in
§1001
8. All persons holding and
seeking to renew both master gas fitter and master plumber licenses issued by
the board are required to attend and show proof of attendance at no less than
six hours as set out in this Section and in §1001
B. Course Materials
1. The board shall be the exclusive agency
for distribution of CPE course materials.
2. The course materials will provide the
basis for a minimum of 2 1/2 hours of study for gas fitters. One hour will be
in the subjects of health protection, consumer protection or environmental
protection, 1/2 hours shall include information concerning
R.S.
37:1361 et seq., LAC 46:LV, and one hour
covering current industry practices and codes, and subjects from a list
approved and published by the board.
3. The course materials will provide the
basis for a minimum of four classroom hours of study for master gas fitters.
One hour will be in the subjects of health protection, consumer protection or
environmental protection, 1/2 hour shall include information concerning
R.S.
37:1361 et seq., LAC 46:LV, and one hour
covering current industry practices, codes, and subjects from a list approved
and published by the board, and 1 1/2 hours on business topics approved by the
board.
4. The course materials will
include board forms within the binding of the course materials that may be
removed for use by the licensees. The forms will include CPE evaluation
forms.
5. The publishers of course
materials must have legal ownership of or an appropriate license for the use of
all copyrighted material included within the course materials. Board-approved
course materials will contain a prominently displayed approval statement in
10-point bold type or larger containing the following language.
"THIS CONTINUING PROFESSIONAL EDUCATION COURSE MATERIAL HAS
BEEN APPROVED BY THE LOUISIANA STATE PLUMBING BOARD FOR USE IN THE (state year)
CPE YEAR. BY ITS APPROVAL OF THIS COURSE MATERIAL, THE LOUISIANA STATE PLUMBING
BOARD DOES NOT ASSUME ANY RESPONSIBILITY FOR THE ACCURACY OF THE CONTENTS.
FURTHER, THE LOUISIANA STATE PLUMBING BOARD HAS NOT MADE ANY DETERMINATION THAT
THE PARTY PUBLISHING THE COURSE MATERIALS HAS COMPLIED WITH ANY APPLICABLE
COPYRIGHT AND OTHER LAWS IN PUBLISHING THE COURSE MATERIAL AND THE LOUISIANA
STATE PLUMBING BOARD DOES NOT ASSUME ANY LIABILITY OR RESPONSIBILITY THEREFOR.
THE COURSE MATERIAL IS NOT BEING PUBLISHED BY NOR IS IT A PUBLICATION OF THE
LOUISIANA STATE PLUMBING BOARD."
6. The publishers of course materials will
conduct instructor training in the use of course materials.
C. Course Providers
1. Course providers shall offer classroom
instruction in the course materials used for the CPE required for renewal of
gas fitter and master gas fitter licenses issued under the Act. Board approval
of course providers will be subject to all of the terms and conditions of this
Section.
2. CPE courses shall be
presented in one of the following formats:
a.
for gas fitters a minimum of 2 1/2 classroom hours presented on one day;
or
b. for master gas fitters, four
hours on one day; or
c. for gas
fitters two sessions totaling 2 1/2 classroom hours presented within a 30-day
period; or
d. for master gas
fitters, two sessions totaling four classroom hours presented within a 30-day
period.
3. Continuing
professional education must be based on the course materials and provided in a
format approved by the board.
4. In
addition to required classroom education provided in each region, material may
be provided in additional formatting as approved by the board.
5. Each course provider shall, at its own
expense and in a format approved by the board, mail, fax or electronically
transmit to the board certification of each licensee's completion of CPE
requirements within 10 days of completion.
6. The board is authorized to enter into a
cooperative endeavor agreement with either the Louisiana Association of
Plumbing, Heating and Cooling Contractors of Louisiana or the Louisiana Pipe
Trades Association, or any subsidiary or affiliate of either non-profit
organization, to jointly provide CPE services to licensed and master gas
fitters. The board is authorized to share costs and expenses with either
organization under terms and conditions that promote the public interest and
avoid gratuitous donation of public funds.
7. Each course provider must notify the board
at least seven working days before conducting classes; the notice shall contain
the time(s) and place(s) where the classes will occur.
8. Each course provider will perform
self-monitoring and reporting as required by the board, including a certified
roster of all persons attending the course, with the license number of each
attendee included.
9. Each course
provider shall permit any board member or a duly designated representative of
the board to monitor any CPE class for compliance purposes.
10. Each course provider shall use only
course instructors that have been approved by the board. Each course provider
shall initially submit to the board's office a list of course instructors it
employs and the instructors' credentials for approval. Course instructors will
be granted ongoing approval. Any changes to instructors shall be approved by
the board.
a. Lists of course instructors to
be approved for the following year must be submitted no later than 30 days
prior to the date of the board's last scheduled quarterly meeting for approval
by the board, unless an extension is requested at or before the August board
meeting and granted by the board.
b. Prior to allowing course instructors to
teach CPE, course providers must provide documentation to the board showing the
instructor's qualifications to teach CPE, including but not limited to detailed
information on any experience in providing instruction, assistance in providing
instruction or successful completion of training for providing
instruction.
c. Course instructors
must comply with this Section. Course providers shall notify the board within
10 working days of any change of an instructor's employment status with the
course provider.
11. Any
individual, business or association who wishes to be a course provider shall
apply to the board for approval using application forms prepared by the board.
In order to be approved, the application must satisfy the board as to the
ability of the individual, business or association to provide quality
instruction in the course materials as required in this Section and must
include:
a. name and address of the
applicant;
b. names and addresses
of all officers, directors, trustees or members of the governing body of any
business or association applying;
c. certificate of good standing issued by the
Louisiana Secretary of State for corporate applicants;
d. taxpayer identification number;
e. facsimile number, statewide toll-free
telephone number, internet website or electronic mail address;
f. fees to be charged to licensees for
attending the course;
g. A CPE
class scheduling plan providing for a least one course in each region. Course
providers must, at a minimum, offer the CPE class in each of the following
cities: Lafayette, New Orleans, Baton Rouge, Alexandria, Shreveport, Lake
Charles and Monroe; any CPE provider for gas fitting shall conduct both plumber
and gas fitter CPE classes. The board or its director may, solely at their
discretion, grant a request that the course not be offered in one or more of
these locations, upon a demonstration of economic infeasibility by the course
provider;
h. a method for quarterly
reporting compilations of licensee evaluations of course provider and course
instructors to the board;
i.
identification of the approved course material options which will be used by
the course provider; and
j. an
application fee to be set as provided by law.
12. The course provider shall purchase course
materials from the board.
13. The
fees charged to the licensees for attending the course will be determined by
the course provider.
14. The board
may refuse to accept any application for approval as a course provider that is
not complete. The board may deny approval of an application for any of the
following reasons:
a. failure to comply with
the provisions of this Section;
b.
inadequate instruction of the materials required to be included in course
materials; or
c. unsatisfactory
evaluations of the course provider by licensees, board members or board
staff.
15. If an
application is refused or disapproved, written notice detailing the basis of
the decision shall be provided to the applicant within 90 days of the date of
the decision.
16. A course
provider's authority to offer instruction in the course materials for which CPE
credit is given expires on December 31 of the calendar year following
approval.
17. The board shall
review course providers for quality of instruction. The board shall also
investigate and take appropriate action, consistent with the Louisiana
Administrative Procedure Act, up to and including revocation of authority to
provide CPE, regarding complaints involving approved course
providers.
18. A provider's failure
to comply with this Section constitutes grounds for disciplinary action in
accord with the Louisiana Administrative Procedure Act, up to and including
revocation of authority to provide CPE, against the provider or for denial of
future applications for approval as a course provider.
D. Course Instructors
1. The board will initially approve course
instructors to provide instruction in the course materials used for the CPE
required for renewal of gas fitter and master gas fitter licenses. Board
approval of course instructors will be subject to all of the terms and
conditions of this Section. An individual who wishes to be approved by the
board as a course instructor must apply to the board using an application form
approved by the board The following minimum criteria will be used by the board
in considering approval of course instructors:
a. all course instructors for master gas
fitters must hold a Louisiana state master gas fitter license, and those for
gas fitter must hold a master or gas fitter license; and
b. demonstrate an ability to train others,
including but not limited to providing a description of their previous training
experience; and
c. must be employed
by an approved course provider.
2. An approved course instructor may use,
under its live supervision, a non-licensed supplemental lecturer to present
subjects of health protection, consumer protection or environmental protection,
information concerning
R.S.
37:1361, et seq., LAC 46:LV published by the
board. Prior to approval, a course instructor must identify to the board, any
supplemental lecturer they intend to use, including a resume from the
supplemental lecturer, and the subject matter the supplemental lecturer will
discuss within 30 days prior to the course being conducted.
3. As a course instructor and licensee of the
board, a course instructor must:
a. be well
versed in and knowledgeable of the course materials;
b. maintain an orderly and professional
classroom environment; and
c.
coordinate with the course provider to develop an appropriate method for
handling disorderly and disruptive students. A course instructor shall report
to the course provider and the board any non-responsive or disruptive student
who attends a CPE course. The board may deny CPE credit to any such student and
require, at the student's expense, successful completion of an additional CPE
course to receive credit.
4. The board shall review course instructors
for quality of instruction. The board shall also respond to complaints
regarding course instructors.
5. A
course instructor's failure to comply with this Section constitutes grounds for
disciplinary action against the instructor or for disapproval of future
applications for approval as a course instructor, in accord with the
Administrative Procedure Act.
6. A
course instructor may use a vendor approved by the board to provide instruction
on products specific to only one approved gas topic and/or one approved
plumbing topic.
AUTHORITY NOTE:
Promulgated in accordance with
R.S.
37:1366(I) and
R.S.
37:1368(H).