Louisiana Administrative Code
Title 46 - PROFESSIONAL AND OCCUPATIONAL STANDARDS
Part I - Architects
Chapter 13 - Administration
Section I-1303 - Architect's Seal or Stamp

Universal Citation: LA Admin Code I-1303

Current through Register Vol. 50, No. 9, September 20, 2024

A. The seal or stamp of the architect shall contain the name of the architect, the architect's license number, and the words "Registered Architect, State of Louisiana."

B. The architect's seal or stamp shall be circular in shape and measure approximately 1 3/4" in diameter. In addition to the words set forth in the preceding paragraph, it shall contain the state emblem. For purposes of this rule, the state emblem is the pelican.

C. Rubber seals and computer generated seals are acceptable.

D. Indicated below is a sample of the seal design authorized by the board.

Click Here To View Image

AUTHORITY NOTE: Promulgated in accordance with R.S. 37:144.

Disclaimer: These regulations may not be the most recent version. Louisiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.