Louisiana Administrative Code
Title 43 - NATURAL RESOURCES
Part XVII - Office of Conservation-Injection and Mining
Subpart 5 - Statewide Order No. 29-M-3
Chapter 33 - Class III (Solution-Mining) Injection Wells
Section XVII-3315 - Cavern Design and Spacing Requirements
Current through Register Vol. 50, No. 9, September 20, 2024
A. This Section provides general standards for design of caverns to assure that project development can be conducted in a reasonable, prudent, and a systematic manner and shall stress physical and environmental safety. The owner or operator shall continually review the design throughout the construction and operation phases taking into consideration pertinent additional detailed subsurface information and shall include provisions for protection from damage caused by hydraulic shock. If necessary, the original development and operational plans shall be modified to conform to good engineering practices.
B. Cavern Spacing Requirements
C. Cavern Coalescence. The Office of Conservation may permit the use of coalesced caverns for solution-mining. It shall be the duty of the applicant, owner or operator to demonstrate that operation of coalesced caverns under the proposed cavern operating conditions can be accomplished in a physically and environmentally safe manner. The intentional subsurface coalescing of adjacent caverns must be requested by the applicant, owner or operator in writing and be approved by the Office of Conservation before beginning or resumption of solution-mining operations. Approval for cavern coalescence shall only be considered upon a showing by the applicant, owner or operator that the stability and integrity of the cavern and salt stock shall not be compromised and that solution-mining operations can be conducted in a physically and environmentally safe manner. If the design of adjacent caverns should include approval for the subsurface coalescing of adjacent caverns, the minimum spacing requirement of §3315.B.2 above shall not apply to the coalesced caverns.
AUTHORITY NOTE: Promulgated in accordance with R.S. 30:4 et seq.