Louisiana Administrative Code
Title 43 - NATURAL RESOURCES
Part XI - Office of Conservation-Pipeline Division
Subpart 4 - Carbon Dioxide
Chapter 43 - Design Requirements for Carbon Dioxide Pipelines
Section XI-4321 - Fittings
Universal Citation: LA Admin Code XI-4321
Current through Register Vol. 50, No. 9, September 20, 2024
A. Butt-welding type fittings must meet the marking, end preparation, and the burst strength requirements of ASME/ANSI B16.9 or MSS SP-75 (incorporated by reference, see §3907).
B. There may not be any buckles, dents, cracks, gouges, or other defects in the fitting that might reduce the strength of the fitting.
C. The fitting must be suitable for the intended service and at least as strong as the pipe and other fittings in the pipeline system to which it is attached.
AUTHORITY NOTE: Promulgated in accordance with R.S. 30:4(C)(17) and R.S. 30:1104(A).
Disclaimer: These regulations may not be the most recent version. Louisiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
