Current through Register Vol. 50, No. 9, September 20, 2024
A. There are
incorporated by reference in this regulation all materials referred to herein.
Those materials are hereby made a part of this regulation and have the full
force of law.
1. All of the materials
incorporated by reference are available for inspection from several sources,
including the following:
a. the Office of
Pipeline Safety, Pipeline and Hazardous Materials Safety Administration, 1200
New Jersey Avenue SE., Washington DC 20590. For more information contact
202-366-4046 or go to the PHMSA Web site at:
http://www.phmsa.dot.gov/pipeline/regs;
b. the National Archives and Records
Administration (NARA). For information on the availability of this material at
NARA, call 202-741-6030 or go to the NARA Web site at:
http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html;
c. copies of standards incorporated by
reference in this part can also be purchased from the respective
standards-developing organization at the addresses provided in the Subsections
below.
B.
American Petroleum Institute (API), 1220 L Street NW., Washington, DC 20005,
phone: 202-682-8000, http://api.org/.
1. API Specification 5L, "Specification for
Line Pipe," 45th edition, effective July 1, 2013, (ANSI/API Spec 5L).
2. ANSI/API Specification 6D, "Specification
for Pipeline Valves," 23rd edition, effective October 1, 2008, (including
Errata 1 (June 2008), Errata 2 (November 2008), Errata 3 (February 2009),
Errata 4 (April 2010), Errata 5 (November 2010), and Errata 6 (August 2011);
Addendum 1 (October 2009), Addendum 2 (August 2011), and Addendum 3 (October
2012)); (ANSI/API Spec 6D).
3. API
Standard 1104, "Welding of Pipelines and Related Facilities," 20th edition,
October 2005, [including errata/addendum (July 2007) and errata 2 (2008), (API
Std 1104)].
C. ASME
International (ASME), Two Park Avenue, New York, NY 10016, 800-843-2763
(U.S/Canada), Web site: http://www.asme.org/.
1. ASME/ANSI B16.9-2007, "Factory-Made
Wrought Buttwelding Fittings," December 7, 2007, (ASME/ANSI B16.9).
D. American Society for Testing
and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken,
PA 119428, phone: 610-832- 9585, Web site: http://www.astm.org/.
1. ASTM A53/A53M-10, "Standard Specification
for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless,"
approved October 1, 2010, (ASTM A53/A53M).
2. ASTM A106/A106M-10, "Standard
Specification for Seamless Carbon Steel Pipe for High-Temperature Service,"
approved April 1, 2010, (ASTM A106/A106M).
3. ASTM A381-96 (Reapproved 2005), "Standard
Specification for Metal-Arc Welded Steel Pipe for Use with High-Pressure
Transmission Systems," approved October 1, 2005, (ASTM A381).
4. ASTM A671/A671M-10, "Standard
Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower
Temperatures," approved April 1, 2010, (ASTM A671/A671M
5. ASTM A672/A672M-09, "Standard
Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service
at Moderate Temperatures," approved October 1, 2009, (ASTM
A672/A672M).
6. ASTM A691/A691M-09,
"Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded
for High-Pressure Service at High Temperatures," approved October 1, 2009,
(ASTM A691).
7. ASTM A333/A333M-11,
"Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature
Service," approved April 1, 2011, (ASTM A333/A333M
8. ASME Boiler and Pressure Vessel Code,
Section IX, Qualification Standard for Welding and Brazing Procedures, Welders,
Brazers, and Welding and Brazing Operators," 2007 edition, July 1, 2007, (ASME
BPVC, Section IX)
E.
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc.
(MSS), 127 Park St. NE., Vienna, VA 22180, phone: 703-281-6613, Web site:
http://www.mss-hq.org/.
1. MSS SP-75-2008 Standard Practice,
"Specification for High-Test, Wrought, Butt-Welding Fittings," 2008 edition,
(MSS SP 75), IBR approved for §195.118(a)
AUTHORITY
NOTE: Promulgated in accordance with
R.S.
30:4(C)(17).
