Louisiana Administrative Code
Title 43 - NATURAL RESOURCES
Part XI - Office of Conservation-Pipeline Division
Subpart 2 - Underwater Obstructions
Chapter 25 - Compressed Natural Gas
Section XI-2529 - Piping
Current through Register Vol. 50, No. 9, September 20, 2024
A. Pipe, tubing, fittings, gaskets, and packing material shall be compatible with the fuel under the service conditions.
B. All tubing shall be a minimum of Type 304 stainless steel. All tubing connections shall be made of manufactured multifarrel compression fittings.
C. Piping, tubing, fittings, and other piping components between a cylinder or pressure vessel and the first shutoff valve shall be capable of withstanding a hydrostatic test of at least four times the rated working pressure without structural failure.
D. Compressed natural gas piping shall be fabricated and tested in accordance with "American National Standard Code for Chemical Plant and Petroleum Refinery Piping," "American National Standards Institute (ANSI) B31.3." Such piping shall be "American Standard Testing Material (ASTM)" steel, Schedule 80, or better. All pipe fittings shall be forged steel stamped 6,000 psi or greater.
E. The following components or materials shall not be used:
F. Piping components such as strainers, snubbers, and expansion joints shall be permanently marked by the manufacturer to indicate the service ratings.
AUTHORITY NOTE: Promulgated in accordance with R.S. 30:751 and 752.