Current through Register Vol. 50, No. 9, September 20, 2024
A. There are incorporated by reference in
this regulation all materials referred to herein. Those materials are hereby
made a part of this regulation. Applicable editions of references approved in
ANSI B31.4 listed in Subsection B of this Section shall apply. Earlier editions
may be used for components manufactured, designed, or installed in accordance
with those earlier editions at the time they were listed. Later editions will
replace those editions listed below as these later editions become
effective.
B. All incorporated
materials are available for inspection in the Materials Transportation Bureau,
Washington, D.C., and at the Office of the Federal Register, 1100 L Street,
N.W., Washington, D.C. In addition, materials incorporated by reference are
available as follows.
1. American Petroleum
Institute (API), 2101 L Street, N.W., Washington, D.C. 20037, or 211 North
Ervay, Suite 1700, Dallas, Texas 75201.
2. The American Society of Mechanical
Engineers (ASME), United Engineering Center, 345 East 47th Street, New York,
N.Y. 10017.
3. Manufacturers
Standardization Society of the Valve and Fittings Industry (MSS), 5203 Leesburg
Pike, Suite 502, Falls Church, VA 22041.
4. American National Standards Institute
(ANSI), 1430 Broadway, New York, N.Y. 10018.
5. American Society for Testing and Materials
(ASTM), 1916 Race Street, Philadelphia, PA 19103.
C. The full title for the publications
incorporated by reference in this regulation and their applicable editions are
as follows.
1. American Petroleum Institute
a. API Specification 6D API
Specifications for Pipeline Valves, which may be obtained from the
Dallas office (1977).
b. API
Specification 1104 Standard for Welding Pipe Lines and Related Facilities
(1980).
c. API Specification 5L
API Specification for Line Pipe (1980).
2. American Society of Mechanical Engineers
a. ASME Boiler and Pressure Vessel Code,
Section VIII, Pressure Vessels, Division 1 (1977).
b. ASME Boiler and Pressure Vessel Code,
Section IX, Welding Qualifications.
3. Manufacturers Standardization Society of
the Valve and Fitting Industry: MSS SP-75, Specification for High-Test
Wrought Weldings Fittings (1976).
4. American National Standards Institute
a. ANSI BI6.9 Factory Made Wrought Steel
Butt-Welded Fittings (1978).
b.
ANSI B3I.4 Liquid Petroleum Transportation Piping Systems (1979).
5. American Society for Testing
and Materials
a. ASTM Specification A53
Standard Specification for Welded and Seamless Steel Pipe (1979).
b. ASTM Specification A106 Standard
Specification for Seamless Carbon Steel Pipe for High-Temperature Service
(1979b).
c. ASTM Specification A134
Standard Specification for Electric-Fusion (Arc)-Welded Steel Plate Pipe, Size
16-inch and Over (1974).
d. ASTM
Specifications A135 Standard Specification for Electric-Resistance Welded Steel
Pipe (1979).
e. ASTM Specification
A139 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe, Size
4-inch and Over (1974).
f. ASTM
Specification A672 Electric-Fusion-Welded Steel Pipe for High Pressure Service
at Moderate Temperatures (1979).
g.
ASTM Specification A691 Carbon and Alloy Steel Pipe Electric-Fusion-Welded for
High Pressure Service at High Temperatures (1979).
h. ASTM Specification A211 Standard
Specification for Spiral-Welded Steel or Iron Pipe (1975).
i. ASTM Specification A333 Standard
Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
(1979).
j. ASTM Specification A381
Standard Specification for Metal Arc-Welded Steel Pipe for High Pressure
Transmission Systems (1979).
AUTHORITY NOTE:
Promulgated in accordance with
R.S.
30:4(C)(17).
