Louisiana Administrative Code
Title 33 - ENVIRONMENTAL QUALITY
Part V - Hazardous Wastes and Hazardous Materials
Subpart 3 - Natural Resources
Chapter 301 - Transportation of Hazardous Liquids by Pipeline [49 CFR Part 195]
Subchapter C - Design Requirements [49 CFR Part 195 Subpart C]
Section V-30175 - Fittings [49 CFR 195.118]
Current through Register Vol. 50, No. 9, September 20, 2024
A. Butt-welding type fittings must meet the marking, end preparation, and the bursting strength requirements of ASME/ANSI B16.9 or MSS SP-75 (incorporated by reference, see §30107). [ 49 CFR 195.118(a)]
B. There may not be any buckles, dents, cracks, gouges, or other defects in the fitting that might reduce the strength of the fitting. [ 49 CFR 195.118(b)]
C. The fitting must be suitable for the intended service and be at least as strong as the pipe and other fittings in the pipeline system to which it is attached. [ 49 CFR 195.118(c)]
AUTHORITY NOTE: Promulgated in accordance with R.S. 30:753.
