Louisiana Administrative Code
Title 33 - ENVIRONMENTAL QUALITY
Part V - Hazardous Wastes and Hazardous Materials
Subpart 3 - Natural Resources
Chapter 301 - Transportation of Hazardous Liquids by Pipeline [49 CFR Part 195]
Subchapter C - Design Requirements [49 CFR Part 195 Subpart C]
Section V-30155 - Qualifying Metallic Components Other than Pipe [49 CFR 195.101]
Universal Citation: LA Admin Code V-30155
Current through Register Vol. 50, No. 9, September 20, 2024
A. Notwithstanding any requirement of the Subchapter which incorporates by reference an edition of a document listed in §30107, a metallic component other than pipe manufactured in accordance with any other edition of that document is qualified for use if: [ 49 CFR 195.101]
1.
it can be shown through visual inspection of the cleaned component that no
defect exists which might impair the strength or tightness of the component;
and [
49 CFR
195.101(a)]
2. the edition of the document under which
the component was manufactured has equal or more stringent requirements for the
following as an edition of that document currently or previously listed in
§30107: [
49 CFR
195.101(b)]
a. pressure testing; [
49 CFR
195.101(b)(1)]
b. materials; and [
49 CFR
195.101(b)(2)]
c. pressure and temperature rating. [
49 CFR
195.101(b)(3)]
AUTHORITY NOTE: Promulgated in accordance with R.S. 30:753.
Disclaimer: These regulations may not be the most recent version. Louisiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
