Current through Register Vol. 50, No. 9, September 20, 2024
A. The
owner or operator of waste pile units subject to LAC 33:V.4476 must develop and
keep on-site until closure of the facility a response action plan. The response
action plan must set forth the actions to be taken if the action leakage rate
has been exceeded. At a minimum, the response action plan must describe the
actions specified in Subsection B of this Section.
B. If the flow rate into the leak
determination system exceeds the action leakage rate for any sump, the owner or
operator must:
1. notify the administrative
authority in writing of the exceedence within seven days of the
determination;
2. submit a
preliminary written assessment to the administrative authority within 14 days
of the determination as to the amount of liquids, likely sources of liquids,
possible location, size, and cause of any leaks, and short-term actions taken
and planned;
3. determine to the
extent practicable the location, size, and cause of any leak;
4. determine whether waste receipts should
cease or be curtailed, whether any waste should be removed from the unit for
inspection, repairs, or controls, and whether or not the unit should be
closed;
5. determine any other
short-term and long-term actions to be taken to mitigate or stop any leaks;
and
6. within 30 days after the
notification that the action leakage rate has been exceeded, submit to the
administrative authority the results of the analyses specified in LAC
33:V.4472.B.3-5, the results of actions taken, and actions planned. Monthly
thereafter, as long as the flow rate in the leak detection system exceeds the
action leakage rate, the owner or operator must submit to the administrative
authority a report summarizing the results of any remedial actions taken and
actions planned.
C. To
make the leak and/or remediation determinations in LAC 33:V.4472.B.3-5, the
owner or operator must:
1. assess the sources
of liquids and amounts of liquids by source;
2. conduct a fingerprint, hazardous
constituent, or other analyses of the liquids in the leak detection system to
identify the sources of liquids and possible location of any leaks, and the
hazard and mobility of the liquids; and
3. assess the seriousness of any leaks in
terms of potential for escaping into the environment; or
4. document why such assessments are not
needed.
AUTHORITY NOTE:
Promulgated in accordance with
R.S.
30:2180 et
seq.
