Current through Register Vol. 50, No. 9, September 20, 2024
Owners or operators of used oil processing and
re-refining facilities must develop and follow a written analysis plan
describing the procedures that will be used to comply with the analysis
requirements of LAC 33:V.4047 and, if applicable, LAC 33:V.4081. The owner or
operator must keep the plan at the facility.
A. Rebuttable Presumption for Used Oil in LAC
33:V.4047. At minimum, the plan must specify the following:
1. whether sample analyses or knowledge of
the halogen content of the used oil will be used to make this
determination;
2. if sample
analyses are used to make this determination:
a. the sampling method used to obtain
representative samples to be analyzed. A representative sample may be obtained
using either:
i. one of the sampling methods
in LAC 33:V.4999.Appendix D; or
ii.
a method shown to be equivalent under LAC 33:V.105.H and I;
b. the frequency of sampling to be
performed and whether the analysis will be performed on-site or off-site;
and
c. the methods used to analyze
used oil for the parameters specified in LAC 33:V.4047; and
3. the type of information that
will be used to determine the halogen content of the used oil.
B. On-Specification Used Oil Fuel
in LAC 33:V.4081. At a minimum, the plan must specify the following if LAC
33:V.4081 is applicable:
1. whether sample
analyses or other information will be used to make this
determination;
2. if sample
analyses are used to make this determination:
a. the sampling method used to obtain
representative samples to be analyzed. A representative sample may be obtained
using either:
i. one of the sampling methods
in LAC 33:V.4999.Appendix D; or
ii.
a method shown to be equivalent under LAC 33:V.105.H and I;
b. whether used oil will be
sampled and analyzed prior to or after any processing/re-refining;
c. the frequency of sampling to be performed
and whether the analysis will be performed on-site or off-site; and
d. the methods used to analyze used oil for
the parameters specified in LAC 33:V.4081; and
3. the type of information that will be used
to make the on-specification used oil fuel determination.
AUTHORITY NOTE:
Promulgated in accordance with
R.S.
30:2180 et
seq.
