Louisiana Administrative Code
Title 33 - ENVIRONMENTAL QUALITY
Part III - Air
Chapter 13 - Emission Standards for Particulate Matter (Including Standards for Some Specific Facilities)
Subchapter F - Abrasive Blasting
Section III-1323 - Emissions from Abrasive Blasting

Universal Citation: LA Admin Code III-1323

Current through Register Vol. 50, No. 9, September 20, 2024

A. Purpose. The purpose of this Subchapter is to reduce particulate matter emissions from facilities that engage in abrasive blasting.

B. Scope. This Subchapter applies to any facility or contractor in the state that engages in or contracts to provide on-site abrasive blasting and that is classified under a Standard Industrial Classification (SIC) Code beginning with 34, 35, or 37 or under SIC Code 1622 or 1721.

C. Compliance. Compliance with these regulations does not eliminate the requirement to comply with any other state or federal regulation or any specific condition of a permit granted by the department.

1. Any new facility that is constructed after promulgation of these regulations shall comply with all of the requirements of this Subchapter before operation may commence.

2. Existing affected facilities shall comply with all of the requirements of this Subchapter as soon as practicable, but no later than one year after promulgation of these regulations.

AUTHORITY NOTE: Promulgated in accordance with R.S. 30:2054(B)(1).

Disclaimer: These regulations may not be the most recent version. Louisiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.