Section
5. Drafting of the Parcel.
(1) A
drawing of a parcel that is inspected shall be used in support of the
certificate of mortgage inspection.
(2) The following items shall be identified
on a drawing of a parcel that is inspected:
(a) Property lines shall be shown by:
1. Boundary dimensions and bearings from the
deed; or
2. Boundary dimensions and
bearings from a record plat; or
3.
By actual field measurement.
(b) The method of determination or basis of
property lines shall be clearly shown.
(c) Major improvement locations shall be
shown:
1. With dimensions to the nearest
property lines;
2. With a minimum
of three (3) dimensions; and
3. In
a manner sufficient to locate the major improvement.
(d) Location dimensions shall be shown:
1. By offsets perpendicular to straight
property lines; or
2. By offsets
radial to curved property lines.
(e) Major improvements shall include:
1. Residences;
2. Garages;
3. Outbuildings;
4. Barns;
5. Driveways;
6. Pools;
7. Porches; and
8. Patios.
(f) Apparent encroachments shall be:
1. Noted and described; and
2. Clearly shown.
(g) Means of access shall:
1. Be shown clearly and graphically;
and
2. Include shared access and
shared driveways.
(h)
Platted and apparent easements shall be clearly identified.
(i) The source of record information for
platted and apparent easements shall be identified by:
1. Deed book and page of recording;
or
2. Title company commitment,
including the name of title company and commitment number; and
3. For apparent easements for items such as
power lines, the name of the easement holder.
(j) Platted setback lines shall be shown
graphically.
(k) Adjacent owner and
record source shall be noted on the drawing.
1. Lot numbers may be used for adjacent
properties located in recorded subdivisions.
2. Conflicting boundary information shall be:
a. Clearly shown on the drawing; and
b. Reported to the client and the
buyer in writing.
(l) If the address of the inspected parcel
is:
1. Posted, it shall be shown;
or
2. Not posted, a statement to
that effect shall be included.
(m) A north arrow with the basis for the
meridian shall be shown on the drawing.
(n) A graphic scale shall be shown on the
drawing.
(o) All apparent
encroachments shall be:
1. Noted and described
on the drawing; and
2. Clearly shown
on the drawing.
(p) A
flood plain certification required by the work order shall reference:
1. Flood plain maps by map identification
number and date; and
2. Levels run
by the surveyor to verify the elevation of the inspected property.
(q) The following caption shall
appear prominently on the sketch:
MORTGAGE INSPECTION
This does not constitute a boundary survey and is not a
recordable document.
(r) If
the certification and the drawing are on separate pieces of paper, this shall
be stated in the report as: (Example: page 1 of 2, page 2 of 2).
(s) The sign and seal of the surveyor and the
date of the mortgage inspection.