Current through Register Vol. 51, No. 3, September 1, 2024
RELATES TO:
KRS
323A.080
NECESSITY, FUNCTION, AND CONFORMITY:
KRS
323A.080 requires that a licensed landscape
architect secure an embossed circular seal of the design prescribed by the
administrative regulation of the board and that a working drawing,
specification or report prepared by, or under the supervision of, the
individual, partnership, or firm bear the imprint of the seal. This
administrative regulation prescribes the design and size of the required
seal.
Section 1. Licensees' Seal. The
seal required by KRS
323A.080 shall:
(1) Be two (2) inches in diameter;
and
(2) Contain in the impression
of the seal:
(a) The words "State of Kentucky"
at the top between the two (2) knurled circles;
(b) The words "Licensed Landscape Architect"
in a like position at the bottom;
(c) The individual's name placed horizontally
in the circular field; and
(d) The
individual's license number placed horizontally beneath the name.
Section 2.
(1) The seal shall be:
(a) An individual embossing seal;
(b) A rubber stamp seal; or
(c) An electronically generated
seal.
(2) An
electronically generated seal shall be used only if:
(a) It is a unique identification of the
landscape architect;
(b) It is
verifiable;
(c) It is under the
landscape architect's direct and sole control;
(d) It is linked to a document in a manner so
that changes are readily determined and visually displayed if any data
contained in the document file was changed subsequent to the electronically
generated seal having been affixed to the document;
(e) Changes to the document after affixing
the electronically generated seal cause the seal to be removed or altered in a
way as to invalidate the seal; and
(f) Once the seal is applied to the document,
the document shall be available in a view-only format.
STATUTORY AUTHORITY:
KRS
323A.080,
323A.210
