Kansas Administrative Regulations
Agency 5 - DEPARTMENT OF AGRICULTURE-DIVISION OF WATER RESOURCES
Article 45 - DESIGN OF LEVEES
Section 5-45-9 - Levees; design storm flow determination
Current through Register Vol. 43, No. 39, September 26, 2024
(a) In determining design storm flow magnitude, the applicant shall use an accepted engineering method.
(b) For drainage areas of less than 2 square miles the following methods are acceptable, where appropriate:
Q = CIA
Where C = the runoff coefficient
I = intensity of rainfall in inches per hour and
A = drainage area in acres.
To determine the proper intensity of rainfall for use with the formula, first determine the appropriate total rainfall from "Technical Paper Number 40, Rainfall Frequency Atlas of the United States, Department of Commerce, May 1961," and the time of concentration from the Kirpich nomograph and then obtain the intensity from the standard rainfall intensity-duration curves;
(c) For drainage areas two square miles or greater, the following methods of determining flow magnitude shall be acceptable, where appropriate: