Kansas Administrative Regulations
Agency 5 - DEPARTMENT OF AGRICULTURE-DIVISION OF WATER RESOURCES
Article 45 - DESIGN OF LEVEES
Section 5-45-17 - Exemption floodway fringe fills
Universal Citation: KS Admin Regs 5-45-17
Current through Register Vol. 43, No. 39, September 26, 2024
Floodway fringe fills are exempt from applying for and obtaining approval from the chief engineer if:
(a) they are:
(1) up to 1600 cubic yards in size;
(2) with a maximum height of two
feet;
(3) more than 100 feet away
from any other floodplain fills; and
(4) constructed according to the design
criteria in K.A.R. 5-45-15; or
(b) they are located in communities which have adopted local standards for floodway fringe fills approved by the chief engineer which meet or exceed the standards adopted by the chief engineer for individual floodway fringe fills. The standards shall include an appeal process, an environmental assessment and a review of local drainage.
Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
