Kansas Administrative Regulations
Agency 5 - DEPARTMENT OF AGRICULTURE-DIVISION OF WATER RESOURCES
Article 40 - DESIGN OF EARTH DAMS
Section 5-40-14 - Testing a principal spillway pipe installation in a dam; applicability
Universal Citation: KS Admin Regs 5-40-14
Current through Register Vol. 43, No. 39, September 26, 2024
(a) For the purpose of testing the leakage rate of principal spillway pipe installation in a dam, an applicant shall conduct a static pressure test of each principal spillway installation constructed of corrugated metal pipe.
(b) A static pressure test shall be required only of a principal spillway installation made of corrugated metal pipe, unless the chief engineer determines that testing principal spillway pipe made of other materials or testing other pipes used in the construction of dams is necessary to protect public safety, life, or property.
Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
