Kansas Administrative Regulations
Agency 5 - DEPARTMENT OF AGRICULTURE-DIVISION OF WATER RESOURCES
Article 3 - APPROPRIATION RIGHTS
Section 5-3-6a - Sealing diversion works

Universal Citation: KS Admin Regs 5-3-6a

Current through Register Vol. 43, No. 12, March 20, 2024

(a) If the chief engineer or any authorized representative has reasonable cause to believe that any person has failed to obey an order or a notice and directive of the chief engineer to cease and desist from operating a diversion works, the chief engineer or authorized representative may place a seal, or a chain and padlock, on the diversion works or any part of the diversion works in a manner that renders the diversion works inoperable without breaking the seal, chain, or padlock.

(b) The chief engineer or any authorized representative may place a seal on any water flowmeter or measuring chamber in a manner that prevents removal of the water flowmeter from the measuring chamber and prevents access to the internal working parts of the water flowmeter without breaking the seal. The seal may include a bolt, chain, lock, or any combination of these, or any other mechanism.

(c) For purposes of this regulation, "authorized representative" shall include any employee of the division or a groundwater management district that has been delegated this authority by the chief engineer in writing.

Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.