Kansas Administrative Regulations
Agency 49 - DEPARTMENT OF LABOR
Article 52 - LOW PRESSURE HEATING BOILERS
Section 49-52-16 - Provisions for thermal expansion in hot water supply systems
Universal Citation: KS Admin Regs 49-52-16
Current through Register Vol. 43, No. 12, March 20, 2024
If the system is equipped with a check valve or pressure-reducing valve in the cold water inlet line, an airtight expansion tank or other suitable air cusion shall be used. If provided, the tank shall be constructed according to the requirements of section VIII, division 1 of the ASME code, with a maximum allowable working pressure to equal or exceed the working pressure of the hot water supply boiler.
Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
