Kansas Administrative Regulations
Agency 49 - DEPARTMENT OF LABOR
Article 51 - HIGH PRESSURE BOILERS
Section 49-51-12 - Repairs and renewals of boiler and pressure vessel fittings and appliances
Universal Citation: KS Admin Regs 49-51-12
Current through Register Vol. 43, No. 12, March 20, 2024
If repairs are made to any fittings or appliances of a boiler or pressure vessel or if it becomes necessary to replace them, the repairs or replacements shall meet the provisions of the following standards:
(a) ASME code sections I and VIII, as adopted in K.A.R. 49-45-1, K.A.R. 49-45-29, K.A.R. 49-45-30, and K.A.R. 49-45-31;
(b) ASME B 31.1, as adopted in K.A.R. 49-45-28;
(c) ASME CSD-1, as adopted in K.A.R. 49-45-27;
(d) NFPA sections 85, 85A, 85F, and 86, as adopted in K.A.R. 49-45-37, K.A.R. 49-45-38, K.A.R. 49-45-39, K.A.R. 49-45-40; and
(e) the national board inspection code, as adopted in K.A.R. 49-45-20.
Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
