Kansas Administrative Regulations
Agency 49 - DEPARTMENT OF LABOR
Article 47 - INSPECTORS
Section 49-47-2 - Application of state serial numbers
Current through Register Vol. 43, No. 12, March 20, 2024
(a) Upon completion of the installation of a new boiler or pressure vessel or at the time of the initial certificate inspection of an existing installation, each boiler or pressure vessel shall be stamped by the inspector with a serial number of the state or affixed with a one-inch by four-inch, corrosion-resistant metal tag with the serial number of the state, consisting of letters and figures to be not less than 516 inch in height and arranged as follows:
High Pressure KS 1,000
Low Pressure KS 1,000 H
Pressure Vessels KS 1,000 U
Antique Hobby KS 1,000 A
(b) All cast iron and low pressure heating boilers or pressure vessels shall have securely attached to the casing, water column, or gauge or other appliance of the boiler or pressure vessel, a corrosion-resistant metal tag on which is stamped the serial number of the state. The tag shall be not less than one inch by four inches in size.
