Kansas Administrative Regulations
Agency 4 - DEPARTMENT OF AGRICULTURE
Article 10 - ANHYDROUS AMMONIA
Section 4-10-4a - Containers
Current through Register Vol. 43, No. 52, December 26, 2024
(a) Each container shall be constructed and tested in accordance with the code and shall have a minimum design pressure of 250 psig.
(b) Subsection (a) shall not prohibit the continued use of permanent storage containers that were constructed and maintained in accordance with Kansas statutes and regulations in effect before the effective date of this regulation.
(c) Each permanent storage container shall be inspected according to K.S.A. 44-913 et seq., and amendments thereto, by the Kansas department of labor, division of industrial safety and health upon initial installation and relocation.
(d)
(e) All repairs and alterations of permanent and mobile containers shall meet the requirements of the code and shall be performed by a person or company that has a current certificate of authorization from the national board of boiler and pressure vessel inspections.
(f) Non-code welding shall be performed only on saddles or brackets that are not within the pressure-retaining boundaries of the container.
(g) All records of inspections and welding on the container shall meet the following requirements: