Kansas Administrative Regulations
Agency 28 - DEPARTMENT OF HEALTH AND ENVIRONMENT
Article 46 - UNDERGROUND INJECTION CONTROL REGULATIONS
Section 28-46-30 - Monitoring and reporting requirements for class I wells

Universal Citation: KS Admin Regs 28-46-30

Current through Register Vol. 43, No. 12, March 20, 2024

40 CFR 146.13, 40 CFR 146.6740 CFR 146.68, and 40 CFR 146.69, as in effect on July 1, 2008, are hereby adopted by reference. In addition to 40 CFR 144.14, as adopted in K.A.R. 28-46-24 and 28-46-31, and 40 CFR 146.70, as adopted in K.A.R. 28-46-31, all of the following requirements shall apply to each class I hazardous waste injection well:

(a) Records of the continuously monitored parameters shall be maintained in addition to the monthly average of and the minimum and maximum values of the following parameters:

(1) Injection pressure;

(2) flow rate;

(3) injection volume; and

(4) annular pressure.

(b) The monitoring results shall be reported to the department on a monthly basis on forms provided by the department.

(c) The necessary number of monitoring wells in appropriate geologic zones for the early detection of contaminant migration shall be determined by the secretary to protect public health, safety, and the environment.

Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.