Kansas Administrative Regulations
Agency 28 - DEPARTMENT OF HEALTH AND ENVIRONMENT
Article 19 - AMBIENT AIR QUALITY STANDARDS AND AIR POLLUTION CONTROL
Section 28-19-18a - Stack height credit

Universal Citation: KS Admin Regs 28-19-18a

Current through Register Vol. 43, No. 39, September 26, 2024

(a) The stack height credit to be used in ambient air quality modeling that calculates the air quality impact of a source, for the purpose of meeting an applicable national ambient air quality standard or determining compliance with the provisions of K.A.R. 28-19-17e pertaining to an applicable maximum allowable increase, shall be the actual stack height unless this height exceeds the good engineering practice stack height determined by procedures prescribed by K.A.R. 28-19-18c. In this case, the allowable good engineering practice stack height value shall be used for the modeling.

(b) The requirements of this regulation shall not apply to any stack height that was in existence, or dispersion techniques implemented on or before December 31, 1970.

Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.