Kansas Administrative Regulations
Agency 28 - DEPARTMENT OF HEALTH AND ENVIRONMENT
Article 19 - AMBIENT AIR QUALITY STANDARDS AND AIR POLLUTION CONTROL
Section 28-19-18 - Stack heights

Universal Citation: KS Admin Regs 28-19-18

Current through Register Vol. 43, No. 39, September 26, 2024

(a) The degree of emission limitation required of any source for control of any air pollutant must not be affected by the portion of any source's stack height that exceeds good engineering practice or any other dispersion technique. The provision of these regulations shall not apply to stack heights in existence or dispersion techniques implemented on or before December 31, 1970, except where pollutants are being emitted from those stacks or using those dispersion techniques by sources as defined in these regulations, which were constructed or reconstructed or for which major modifications, as defined in the Kansas state implementation plan, were carried out after December 31, 1970.

(b) Good engineering practice for a stack height shall be determined in accordance with the provisions of K.A.R. 28-19-18a through 28-19-18f.

Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.