Kansas Administrative Regulations
Agency 28 - DEPARTMENT OF HEALTH AND ENVIRONMENT
Article 15a - PRIMARY DRINKING WATER
Section 28-15a-23 - Inorganic chemical sampling and analytical requirements

Universal Citation: KS Admin Regs 28-15a-23
Current through Register Vol. 43, No. 39, September 26, 2024

Each person that operates a public water supply system shall comply with the sampling and analytical requirements specified in 40 C.F.R. 141.23, as in effect on July 1, 2015 and hereby adopted by reference, with the addition of the following text, which shall be added at the beginning of 40 C.F.R. 141.23(c):

"Inorganic analysis for calcium, chloride, iron, magnesium, manganese, pH, potassium, silica, sodium, specific conductance, sulfate, total alkalinity, total dissolved solids, total hardness, and total phosphorus shall be required from each community water supply system with its own source of supply and from each non-transient, non-community water supply system with its own source of supply. Each person operating a groundwater system shall take one sample at each sampling point during each compliance period. Each person operating a surface water system (or combined surface water and groundwater system) shall take one sample annually at each sampling point."

Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.