Kansas Administrative Regulations
Agency 14 - KANSAS DEPARTMENT OF REVENUE-DIVISION OF ALCOHOLIC BEVERAGE CONTROL
Article 7 - TAX AND TAX STAMPS; CROWNS AND LIDS
Section 14-7-2 - Beer, crowns, lids, and labels; stamping of master carton, keg shipments

Universal Citation: KS Admin Regs 14-7-2

Current through Register Vol. 43, No. 39, September 26, 2024

(a) Beer containing more than 3.2% of alcohol by weight shall not be required to have an identifying mark on each container evidencing Kansas tax paid.

(b) All labels attached to the original package shall be approved by the director of alcoholic beverage control before the package may be sold in the state of Kansas.

(c) Each case of bottled or canned beer shipped into the state of Kansas by a beer manufacturer or supplier shall have the legend, "Kansas strong," or other appropriate language, stamped in black lettering on the exterior master carton in any position normally used for code dates, or as approved by the director. Labels, crowns and lids used for the packaging of strong beer for the state of Kansas shall not be required to indicate the alcoholic content. All kegs of strong beer shipped into the state of Kansas shall be identified by a distinctive bung.

Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.