Kansas Administrative Regulations
Agency 112 - KANSAS RACING AND GAMING COMMISSION
Article 107 - ELECTRONIC GAMING MACHINES
Section 112-107-1 - Electronic gaming machine requirements

Universal Citation: KS Admin Regs 112-107-1

Current through Register Vol. 43, No. 39, September 26, 2024

(a) Each electronic gaming machine (EGM) approved for use in a gaming facility shall meet the requirements of article 110.

(b) Unless a facility manager's electronic gaming monitoring system is configured to automatically record all of the information required by this article, the facility manager shall be required to house the following entry authorization logs in each EGM:

(1) A machine entry authorization log that documents each time an EGM or any device connected to the EGM that could affect the operation of the EGM is opened. The log shall contain, at a minimum, the following:
(A) The date and time of opening;

(B) the purpose for opening the EGM or device;

(C) the signature and the license or permit number of the person opening and entering the EGM or device; and

(D) if a device, the asset number corresponding to the EGM in which the device is housed; and

(2) a progressive entry authorization log that documents each time a progressive controller not housed within the cabinet of the EGM is opened. The log shall contain, at a minimum, the following:
(A) The date and time of opening;

(B) the purpose for accessing the progressive controller; and

(C) the signature and the license or permit number of the person accessing the progressive controller. Each log shall be maintained in the progressive controller unit and have recorded on the log a sequence number and the gaming supplier's serial number of the progressive controller.

(c) Each EGM shall be equipped with a lock controlling access to the card cage door securing the microprocessor, and the lock's key shall be different from any other key securing access to the EGM's components, including its belly door or main door, bill validator, and electronic gaming cash storage box. Access to the key securing the microprocessor shall be limited to a supervisor in the security department. The department's director of security shall establish a sign-out and sign-in procedure for the key, which shall include notification to commission staff before release of the key.

Disclaimer: These regulations may not be the most recent version. Kansas may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.