Iowa Administrative Code
Agency 21 - Agriculture and Land Stewardship Department
Chapter 85 - Weights and Measures
Testing and Accuracy
Rule 21-85.53 - Rejecting Devices

Universal Citation: IA Admin Code 21-85.53

Current through Register Vol. 47, No. 6, September 18, 2024

Moisture-measuring devices may be rejected for any of the following reasons:

(1) The moisture-measuring device tested is found to be out of tolerance with the measuring device used by the department by one of the inspectors so assigned by more than 0.7 percent on grain moisture content.

(2) The person does not have available the latest charts for type of device being used.

(3) The person does not have available the proper scale or scales and thermometers for use with the type of device being used.

(4) The moisture-measuring device is not free from excessive dirt, debris, cracked glass or is not kept in good operational condition at all times.

This rule is intended to implement Iowa Code section 215A.6.

Disclaimer: These regulations may not be the most recent version. Iowa may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.