Iowa Administrative Code
Agency 21 - Agriculture and Land Stewardship Department
Chapter 85 - Weights and Measures
Moisture-measuring Devices
Rule 21-85.43 - Testing High-moisture Grain
Universal Citation: IA Admin Code 21-85.43
Current through Register Vol. 47, No. 6, September 18, 2024
When testing high-moisture grain, the operator of a moisture-measuring device shall use the following procedure: Test each sample six times, adding the six measurements thus obtained and dividing the total by six to obtain an average, which shall be deemed to be the moisture content of such sample.
This rule is intended to implement Iowa Code section 215A.7.
Disclaimer: These regulations may not be the most recent version. Iowa may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
