Iowa Administrative Code
Agency 21 - Agriculture and Land Stewardship Department
Chapter 85 - Weights and Measures
Measures
Rule 21-85.21 - Tolerances on Petroleum Products Measuring Devices
Universal Citation: IA Admin Code 21-85.21
Current through Register Vol. 47, No. 6, September 18, 2024
All pumps or meters at filling stations may have a tolerance of not over five cubic inches per five gallons, minus or plus. All pumps or measuring devices of a large capacity shall have a maintenance tolerance of 50 cubic inches, minus or plus, on a 50-gallon test. An additional one-half cubic inch tolerance shall be added per gallon over and above a 50-gallon test. Acceptance tolerances on large capacity pumps and measuring devices shall be one-half the maintenance tolerances.
This rule is intended to implement Iowa Code sections 214.2 and 215.20.
Disclaimer: These regulations may not be the most recent version. Iowa may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.