Indiana Administrative Code
Title 675 - FIRE PREVENTION AND BUILDING SAFETY COMMISSION
Article 31 - INDIANA AMUSEMENT DEVICE CODE
Rule 5 - Technical Requirements
Section 5-8 - Welding, cutting, and brazing

Universal Citation: 675 IN Admin Code 5-8
Current through September 18, 2024

Authority: IC 22-13-2-8

Affected: IC 22-15-2-7; IC 22-15-7

Sec. 8.

No welding, cutting, or brazing shall be accomplished where the public can directly observe or be hit by sparks or flying materials generated by the process. All compressed gas, compressed gas cylinders, electrical equipment, and other apparatus associated with welding, cutting, and brazing shall be stored, handled, and meet the requirements of the rules of the regulated amusement device safety board.

NOTE: Transferred from the Regulated Amusement Device Safety Board (685 IAC 1-5-8) to the Fire Prevention and Building Safety Commission (675 IAC 31-5-8) by P.L. 249-2019, SECTION 16, effective July 1, 2019.

Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.