Indiana Administrative Code
Title 675 - FIRE PREVENTION AND BUILDING SAFETY COMMISSION
Article 30 - INDIANA BOILER AND PRESSURE VESSEL RULES
Rule 5 - General Requirements
Section 5-4 - Lap seam cracks
Universal Citation: 675 IN Admin Code 5-4
Current through September 18, 2024
Authority: IC 22-13-2-8
Affected: IC 22-15-6
Sec. 4.
The shell or drum of a boiler or unfired pressure vessel in which a lap seam crack is discovered along a longitudinal riveted joint shall be immediately discontinued from use.
Transferred from the Boiler and Pressure Vessel Rules Board ( 680 IAC 2-5-4) to the Fire Prevention and Building Safety Commission ( 675 IAC 30-5-4) by P.L. 249-2019, SECTION 15, effective July 1, 2019.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
