Indiana Administrative Code
Title 675 - FIRE PREVENTION AND BUILDING SAFETY COMMISSION
Article 30 - INDIANA BOILER AND PRESSURE VESSEL RULES
Rule 10 - Existing Installations of Heating Boilers
Section 10-16 - Inspection; stamping of serial number

Universal Citation: 675 IN Admin Code 10-16

Current through September 18, 2024

Authority: IC 22-13-2-8

Affected: IC 22-15-6

Sec. 16.

(a) At the time of the first operating permit inspection, the inspector shall assign and attach a state registration number preceded by the letters "IND". The letters and figures shall not be less than one-fourth (1/4) inch in height and shall be arranged as follows:

IND 1234

(b) All cast iron heating boilers shall have securely attached to the front of the boiler a metal tag not less than one (1) inch in height that shall have the state registration number stamped thereon.

(c) The number assigned shall be one (1) from the series provided to the inspector in accordance with 675 IAC 30-3-18.

(d) The number shall not be concealed by lagging or paint and shall be visible at all times.

Transferred from the Boiler and Pressure Vessel Rules Board ( 680 IAC 2-10-16) to the Fire Prevention and Building Safety Commission ( 675 IAC 30-10-16) by P.L. 249-2019, SECTION 15, effective July 1, 2019.

Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.