Indiana Administrative Code
Title 675 - FIRE PREVENTION AND BUILDING SAFETY COMMISSION
Article 19 - ENERGY CONSERVATION CODES
Rule 4 - 2010 Indiana Energy Conservation Code
Section 4-5 - Section 5 amendments
Universal Citation: 675 IN Admin Code 4-5
Current through September 18, 2024
Authority: IC 22-13-2-2
Affected: IC 22-12; IC 22-13; IC 22-14; IC 36-7-2-9
Sec. 5.
Amend Section 5 as follows:
(1) Amend Section 5.1.2.2 to delete everything after the word "construction" and insert "in accordance with the rules of the Commission at 675 IAC 12-4-7".
(2) Delete Section 5.1.2.3 in its entirety without substitution.
(3) Delete Section 5.2.2 in its entirety without substitution.
(4) Delete Section 5.1.4.2 in its entirety without substitution.
(5) Delete Section 5.7 in its entirety and substitute as follows:
5.7 Submittals compliance; alternative
methods and materials
5.7.1 For construction
projects filed for which a design professional is required under
675 IAC 12-6-9(a)
and where energy conservation details are
required by
675 IAC
12-6-7(g)(15), one of the following,
sealed and signed by the design professional, shall be submitted:
(a) A Compliance Report, from an accepted
computer compliance tool such as ComCheck (www.energycodes.gov/comcheck/) or
other prescriptive compliance software or other methods approved by the
Division, demonstrating compliance with the requirements of the Indiana Energy
Conservation Code, 2010 edition (675 IAC
19-4).
(b)
A report from a comprehensive energy modeling program and an affidavit signed
and sealed by the design professional affirming that the tools used to simulate
the design energy performance indicate that the submitted design will meet or
exceed the requirements of the Indiana Energy Conservation Code, 2010 edition
(675 IAC
19-4).
5.7.2 For construction projects filed for
which a design professional is not required under
675 IAC 12-6-9(a)
and where energy conservation details are
required by
675 IAC
12-6-7(g)(15), one of the following
shall be submitted:
(a) A Compliance Report,
from an accepted computer compliance tool such as ComCheck (
www.energycodes.gov/comcheck/) or
other prescriptive compliance software or other methods approved by the
Division, demonstrating compliance with the requirements of the Indiana Energy
Conservation Code, 2010 edition (675 IAC
19-4).
(b)
A report from a comprehensive energy modeling program and an affidavit signed
and sealed by a registered design professional affirming that the tools used to
simulate the design energy performance indicate that the submitted design will
meet or exceed the requirements of the Indiana Energy Conservation Code, 2010
edition (675 IAC
19-4).
5.7.3 Compliance reports filed to comply with
5.7.1(b) and 5.7.2(b) must be performed by software that complies with the
provisions of Appendix G of this rule.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
