Indiana Administrative Code
Title 675 - FIRE PREVENTION AND BUILDING SAFETY COMMISSION
Article 18 - MECHANICAL CODE
Rule 1.6 - 2014 Indiana Mechanical Code
Section 1.6-12 - Adoption by reference; ASME B16.51
Current through September 18, 2024
Authority: IC 22-13-2-2
Affected: IC 22-12-7; IC 22-13; IC 22-14; IC 36-8-17
Sec. 12.
(a) That certain document being titled ASME B16.51, Copper and Copper Alloy Press-Connect Pressure Fittings, 2011 edition, as published by The American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990, is hereby adopted by reference as if fully set out in this rule save and except those revisions made in this rule.
(b) Amend Table 1202.5 to insert, after "Copper and copper alloys standards", "ASME B16.51 2011".
(c) Amend Section 13 by deleting, in the first sentence, "The manufacturer of press" and inserting "Press".
(d) Amend Section 14.1 to delete the first sentence and insert to read as follows: Test reports demonstrating compliance with this Standard shall be provided to the code official upon request.
(e) Amend Figure 1 Method of Designating Laying Lengths of Fittings and Openings of Reducing Fittings, GENERAL NOTES: (d) to insert, after "shall be", "as".
(f) Amend Table 1 Dimensions of Press-Connect Ends, GENERAL NOTES: (c) to insert, after "shall be", "as".
(g) Amend Mandatory Appendix I, Table I-1 Dimensions of Press-Connect Ends, GENERAL NOTES: (c) to insert, after "shall be", "as".
(h) Amend Mandatory Appendix II, References as follows:
