Indiana Administrative Code
Title 675 - FIRE PREVENTION AND BUILDING SAFETY COMMISSION
Article 15 - INDUSTRIALIZED BUILDING SYSTEMS
Rule 2 - Indiana Mobile Structures Code
Section 2-61 - Material standards for vent piping and fittings
Universal Citation: 675 IN Admin Code 2-61
Current through September 18, 2024
Authority: IC 22-13-2-13
Affected: IC 22-12; IC 22-13; IC 22-14; IC 22-15
Sec. 61.
(a) Pipe. Vent piping shall be standard weight steel, wrought iron, brass, copper tube DWV, listed plastic cast iron or other approved or listed materials.
(b) Fittings. Appropriate fittings shall be used for all changes in direction or size and where pipes are joined. The material and design of vent fittings shall conform to the type of piping used.
(1) Fittings for screw pipe shall be cast
iron, malleable iron, plastic, or brass, with standard pipe threads.
(2) Fittings for copper tubing shall be cast
brass or wrought copper.
(3)
Fittings for plastic piping shall be of appropriate material and made to
approved or applicable standards.
(4) Brass adaptor fittings or wrought copper
shall be used to join copper tubing to threaded pipe.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
