Indiana Administrative Code
Title 620 - OCCUPATIONAL SAFETY STANDARDS COMMISSION
Article 1 - HEALTH AND SAFETY STANDARDS
Rule 1 - Jurisdiction; Filing; Parties; Pleadings; Conduct of Hearings; Settlement
Section 1-3 - Forging machine dies; adoption of federal standard
Universal Citation: 620 IN Admin Code 1-3
Current through March 20, 2024
Authority: IC 22-8-1.1-7
Affected: IC 22-8-1.1-15
Sec. 3.
The Indiana Occupational Safety Standards Commission adopted the following amendment to 29 CFR 1910.218(h)(5) -Forging Machines:
(5) Changing dies. When dies are being changed, maintenance performed, or any work done on the machine, the power to the upsetter shall be locked out and an adequate method be provided to insure that the fly wheel shall be at rest.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
