Indiana Administrative Code
Title 575 - STATE SCHOOL BUS COMMITTEE
Article 1 - MINIMUM SPECIFICATIONS FOR SCHOOL BUSES
Rule 9 - Type A, Type B, Type C, and Type D School Buses
Section 9-74 - Temporary bus or route identification placard frame
Universal Citation: 575 IN Admin Code 9-74
Current through March 20, 2024
Authority: IC 20-27-3-4
Affected: IC 20-27-9
Sec. 74.
(a) The frame must only be located on the passenger side of the school bus underneath the first window to the rear of the service door. The frame and placard must be National School Bus Yellow with black numbers conforming to the appropriate administrative rule on lettering and identification. The placard frame must not exceed the following:
(1) A height of four (4) inches.
(2) A width of nine (9) inches.
(3) A depth of three-eighths (3/8) inch.
(b) Companies may use magnetic signs displaying the words "TEMPORARY SCHOOL TRANSPORTATION" in the place of standard lettering when a bus is on loan to an entity involved in school transportation activities.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
