Indiana Administrative Code
Title 575 - STATE SCHOOL BUS COMMITTEE
Article 1 - MINIMUM SPECIFICATIONS FOR SCHOOL BUSES
Rule 2.5 - Type B School Bus (Repealed)
Section 2.5-4 - Front bumper
Universal Citation: 575 IN Admin Code 2.5-4
Current through March 20, 2024
Authority: IC 20-27-3-4
Affected: IC 20-27-9
Sec. 4.
(a) The chassis manufacturer must furnish the front bumper as part of the chassis.
(b) The front bumper must extend to the outer edges of the fenders at the bumper top line and be made of pressed steel channel that is at least three-sixteenths (3/16) inches thick. Chrome bumpers are prohibited.
(c) The front bumper must be black.
(d) The only permissible applications on the front bumper are a yellow bus number and black, abrasive, non-skid tape.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
