Indiana Administrative Code
Title 50 - DEPARTMENT OF LOCAL GOVERNMENT FINANCE
Article 26 - COMPUTER STANDARDS FOR A UNIFORM AND COMMON PROPERTY TAX MANAGEMENT SYSTEM
Rule 20 - Property Tax File Format Requirements for 2011-Pay-2012 Data and Forward
Section 20-2 - Instructions
Universal Citation: 50 IN Admin Code 20-2
Current through September 18, 2024
Authority: IC 6-1.1-31-1; IC 6-1.1-31.5-3.5
Affected: IC 6-1.1-31.5
Sec. 2.
(a) Data format instructions are as follows:
(1) Each
file must have a header record and a trailer record in the exact specified
format with designated "FILENAME" and the word "TRAILER" in
uppercase.
(2) All fields are fixed
length.
(3) Left justify all
alphanumeric fields.
(4) All
numeric fields must have leading zeros if field value does not utilize all
available spaces.
(5) Assume no
decimal precision for all numeric fields without format
clarification.
(6) All decimal
precision is implied. For example, for format 3.2, send 12345. It will be read
as "123.45".
(7) Yes/No fields must
have "Y" or "N".
(8) All date
fields must be in mm/dd/yyyy format, and entries must contain a valid
date.
(9) All fields that reference
a code list should contain a value from the lists provided in the Property Tax
Management System Code List Manual. This document is available on the
department's website located at www.in.gov/dlgf/
(10) Place a negative sign "-" at the far
left of the field for all negative numbers.
(11) Note all format requirements specified
at the field level.
(12) When
capturing data as designated by a code list, the item must adhere to the
designated code list. If a county needs a code list to be modified, it must
notify the department and the legislative services agency for
consideration.
(13) Phone number
extensions may be replaced with spaces if no extension exists. Format required
is ###-###-#### ##### (e.g., 317-555-5555 44444).
(14) ZIP code format is expected to be
xxxxx-xxxx. However, the space allocated should accommodate international ZIP
codes. If no + 4 for the ZIP code is available, fill with 0000.
(b) Submission instructions are as follows:
(1) The submission must include data
for the entire county. Each file must include all data for all
townships.
(2) Data must be
submitted on CD-ROM, by email, or other designated depository as specified by
the department and the legislative services agency at a later date.
(3) Either:
(A) email the dataset to data@dlgf.in.gov; or
(B) upload the dataset via the
Indiana gateway for government units portal.
(4) The state will validate that your data
submission meets the defined file structure format and may perform additional
analysis to verify that the data meets the standards prescribed in this rule.
In the event that your data submission does not meet the required standards,
you will be notified of noncompliance issues and asked to resubmit your data.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.