Indiana Administrative Code
Title 329 - SOLID WASTE MANAGEMENT DIVISION
Article 16 - ELECTRONICS WASTE MANAGEMENT
Rule 2 - Definitions
Section 2-49 - "Waste determination" defined

Universal Citation: 329 IN Admin Code 2-49

Current through March 20, 2024

Authority: IC 13-14-8-7; IC 13-15; IC 13-19-3

Affected: IC 13-30-2; IC 36-9-30

Sec. 49.

"Waste determination" means the documented process of determining the qualitative and quantitative nature of a particular waste in order to establish the regulatory status of the waste and determine if the waste must be disposed of under the hazardous waste rules at 329 IAC 3.1, the PCB rules at 329 IAC 4.1, or the solid waste rules at 329 IAC 10. The regulatory status may be determined using either generator knowledge or testing by the methods in 40 CFR 261, Subpart C, or equivalent methods approved under 40 CFR 260.21 to ascertain the following:

(1) The waste is a hazardous waste under 40 CFR 262.11 and is regulated under 329 IAC 3.1 because of the following:

(A) The waste is not excluded from regulation under 40 CFR 261.4.

(B) The waste is a listed waste under 40 CFR 261, Subpart D.

(C) The waste exhibits characteristics specified in 40 CFR 261, Subpart C.

(2) The waste contains regulated amounts of PCBs and is regulated under 329 IAC 4.1.

(3) The waste is a solid waste and can be disposed of under 329 IAC 10.

Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.