Current through September 18, 2024
Authority: IC 13-19-3-1; IC 13-20-13-11
Affected: IC 13-11-2-251; IC 13-14-13; IC 13-20-21-3; IC
13-30-2; IC 36-9-30
Sec. 6.
(a) An
application for a certificate of registration for a waste tire processing
operation must:
(1) be completed on a form
provided by the department;
(2)
contain all information requested on the form, as specified in subsection (b);
and
(3) include the application fee
required under section 4 of this rule [sic, section 4 of this
rule].
(b) The
following must be submitted with the application form for a certificate of
registration for a waste tire processing operation:
(1) The name, address, and contact
information of the owner or operator of the waste tire processing
operation.
(2) A United States
Geological Survey seven and one-half (7 1/2) minute topographic map or
equivalent that shows the boundaries of the waste tire processing
operation.
(3) A legible map of the
waste tire processing operation on paper not less than eight and one-half (8
1/2) inches by eleven (11) inches in size that includes the following:
(A) Property boundaries.
(B) On-site buildings.
(C) Location, maximum length, maximum width,
and maximum height of each area to be used to hold waste tires for
processing.
(D) Separation
distances between waste tire holding areas and the following:
(i) Buildings.
(ii) Fences.
(iii) Property boundaries.
(iv) Other waste tire holding
areas.
(v) Other accumulated
materials that may:
(AA) be a fire hazard;
or
(BB) restrict access to the
waste tires.
(E) A scale ratio.
(F) An arrow to true
north.
(4) A description
of the following:
(A) Buildings, signs,
notices, and alarms to be used to manage waste tires at the facility.
(B) The program that will be used to manage
waste tires at the facility, including the following:
(i) The anticipated sources and amounts of
incoming waste tires in PTEs.
(ii)
The names and locations of the anticipated destinations of the waste
tires.
(iii) The method and
schedule for the following:
(AA) Draining
incoming waste tires.
(BB)
Preventing waste tires from accumulating water.
(5) The contingency plan required
by section 18 of this rule.
(6) A
description of the measures the owner or operator will use to ensure that the
operation will not accumulate more than the amount of PTEs specified in IC
13-11-2-251 at any time unless the
facility is also a registered waste tire storage site.
(7) A plan for compliance with the waste tire
management requirements specified in section 17 of this rule.
(c) If the application for a
certificate of registration is for a location not owned by the applicant, the
application must include the signature of the person that owns the property on
which:
(1) the waste tire processing
operation is located; or
(2) for a
mobile waste tire processing operation, each location where waste tire
processing occurs.
(d) A
separate certificate of registration is required for each location at which
waste tire processing occurs, unless the registration is only for a mobile
waste tire processing operation.
(e) A new certificate of registration is
required when a waste tire processing operation that is not a mobile operation
relocates to a new location.
(f)
The owner or operator of a mobile waste tire processing operation shall:
(1) comply with the:
(A) requirements of subsection (a);
and
(B) contingency plan
requirements of either section 18 or 18.5 of this rule; and
(2) provide notice to the department of the
location at which waste tires are being processed within thirty (30) days of
initiating waste tire processing at each location, including the signature of
the person that owns the property.
(g) A waste tire processing operation that
operates as both a nonmobile and a mobile waste tire processing operation may
operate under a single registration by complying with:
(1) the notification requirements under
subsection (f)(2); and
(2) other
applicable requirements under this article for a:
(A) mobile waste tire processing operation;
and
(B) nonmobile waste tire
processing operation.
(h) Unless a person is applying for a
certificate of registration for only a mobile waste tire processing operation,
the applicant for a certificate of registration for a waste tire processing
operation shall submit to the fire department with jurisdiction over the waste
tire processing operation a copy of the:
(1)
completed application; and
(2)
contingency plan required by section 18 of this rule.
(i) An application for a certificate of
registration must be submitted as a paper copy unless the commissioner makes a
determination that a copy in an electronic format as prescribed by the
commissioner and in accordance with IC
13-14-13 is sufficient.
(j) Registration under this rule does not
guarantee that a waste tire processing operation complies with other
applicable:
(1) county or local ordinances;
or
(2) state rules or
statutes.
