Indiana Administrative Code
Title 329 - SOLID WASTE MANAGEMENT DIVISION
Article 10 - SOLID WASTE LAND DISPOSAL FACILITIES
Rule 17 - Municipal Solid Waste Landfill Liner System; Design, Construction, and CQA/CQC Requirements
Section 17-10 - Geosynthetic clay component of the liner; design, construction, and CQA/CQC requirements
Universal Citation: 329 IN Admin Code 17-10
Current through March 20, 2024
Authority: IC 13-14-8-7; IC 13-15-2-1; IC 13-19-3-1
Affected: IC 13-30-2; IC 36-9-30
Sec. 10.
(a) The geosynthetic clay liner (GCL) must meet current industry design standards and any additional design standards necessary to obtain an adequate GCL, as specified in the construction plans or as determined by the commissioner.
(b) The project engineer shall ensure that adequate quality control and quality assurance procedures have been followed throughout all of the following operations:
(1) Refining of raw materials, based on the
manufacturer's documentation, and manufacturing of geosynthetic clay
liner.
(2) Storage, handling, and
shipment of the geosynthetic clay liner.
(3) Installation of the geosynthetic clay
liner, including:
(A) proper placement,
joining, and repair procedures; and
(B) proper backfilling or covering
procedures.
Disclaimer: These regulations may not be the most recent version. Indiana may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
