Current through September 18, 2024
Authority: IC 13-14-8-7; IC 13-15; IC 13-19-3
Affected: IC 13-18; IC 13-20; IC 36-9-30
Sec. 3.
(a) A permit
application for a new MSWLF or a lateral expansion must be accompanied by a
minimum of two (2) intersecting cross-sectional drawings. The drawings must
include the following:
(1) Elevations that
correlate with USGS mean sea level data.
(2) Final construction plan with:
(A) horizontal and vertical solid waste
boundaries;
(B) drainage
structures;
(C) leachate collection
system;
(D) explosive gas
management system components;
(E)
proposed depth of the excavation; and
(F) other significant features that may
adversely affect the facility design.
(b) In addition to the two (2)
cross-sectional drawings required in subsection (a), a permit application for a
new MSWLF or a lateral expansion must be accompanied by a minimum of two (2)
geological cross-sections. The two (2) geological cross-sections must
intersect, and the locations of the sections indicated on the existing feature
plan or the piezometric contour map. Each geologic cross-sectional drawing must
have horizontal and vertical bar scales and depict the following:
(1) The types of soil materials or rock
strata, as identified by boring logs, from the ground surface to the required
boring depth.
(2) Present
topography (mean sea level elevations).
(3) Uppermost aquifer and all significant
zones of saturation.
(4) Any
vertical components of ground water flow based on information contained in the
hydrogeologic site investigation report for the uppermost aquifer and all
significant zones of saturation.
(5) All boring locations along the transect
used to prepare the cross section.
(6) Proposed horizontal solid waste
boundary.
(7) The base of the liner
system or if required any leak detection system and the top of the protective
system.
(8) Direction of
cross-sectional traverse.
(9)
Proposed depth of excavation if it differs from that in subdivision
(7).
(10) The original grade, if
available.
(c) A permit
application for a new MSWLF or a lateral expansion must be accompanied by
detail drawings that are cross-sectional of the:
(1) liner system;
(2) geosynthetic anchor trenches if
applicable;
(3) final cover
system;
(4) drainage
structures;
(5) permanent
sedimentation and erosion control structures;
(6) leachate collection system, including:
(A) subgrade elevation;
(B) piping;
(C) cleanout location;
(D) drainage features and
structures;
(E) sump, risers, and
manholes; and
(F) lift station
elevations if applicable;
(7) explosive gas monitoring and management
system;
(8) on-site
roads;
(9) monitoring well
construction; and
(10) any other
site specific construction details that may adversely affect the facility
plan.
